Tactical Software Knowledge Base

Category » Modem Servers

There were 4 articles found in this category:

1. Can I set up a redirector to get the next available modem or serial device on a server?
   This is a common feature of modem servers, which often support a "hunt group" or "rotary" feature that makes multiple modems appear at a single TCP port number on the server. You can then use that port number when configuring the DialOut/EZ Redirector COM ports, and the server will automaticall ...
2. How do I configure a Patton 29xx RAS server to work with your DialOut/EZ software?
   Page 111 of the Patton Administrator's Reference Guide shows the settings for allowing outbound calls. Make the following changes in the Dial Out window on your Patton server: Set the TCP Port to: 7000 Set the TCP Type to: Telnet Set Restrict to LAN to: Disable Set Login Technique to: None The ...
3. Which hardware modem servers are compatible with DialOut/EZ?
   The following modem servers are known to work with DialOut/EZ: Manufacturer Model(s) ------------------ ------------ Cisco 2xxx, 3xxx, AS5xxx Digi 7000 Series Lucent APX1000, TNT MultiTech MultiAccess, MA100-1M, CommPlete Patton ...
4. What make and model of modems can I use with TacServe?
   Any model of modem that connects to a hardware COM port or creates COM ports in Windows will work with TacServe. For large TacServe configurations, we recommend the following modem cards: PRI: Dialogic DivaServer (formally Eicon DivaServer) Configurations range from single to multiple T1/E1s ...