Tactical Software Knowledge Base

Category » Serial Servers

There were 4 articles found in this category:

1. Which serial-to-Ethernet servers are compatible with Serial/IP?
   The following serial servers are known to work with Serial/IP: Manufacturer Model(s) ------------------ ------------ AAxeon STE, LS, PS and SS Series Acksys Cometh Advantech EKI and ADAM Series AETA AECIP Alpha Project SH Series A ...
2. Which serial servers support control signals?
   Most hardware Ethernet-to-serial servers can only send data between the application and serial device. In order to send and receive serial control signals (such as DTR and DCD), a serial server must support the COM Port Control Protocol (RFC 2217). Many serial-based applications and the device ...
3. How do I configure a MRV LX-Series device so that I can access its serial ports with Serial/IP?
   In the MRV LX Console, click on Async under the Ports section on the left-side of the interface. A tabbed list of all the ports will appear on the right-hand side. Choose the port that you wish to access via Serial/IP and make sure the following two settings are in place: - Set the Access drop ...
4. How do I enable the COM Port Control protocol on Digi TS series devices?
   In the port setup of the Digi TS select "Printer" as the port type. The Port Number entered in Serial/IP will then be (2000 + the TS port number), so Port 1 on the TS can be accessed on TCP port 2001, Port 2 is accessed on TCP port 2002, etc.