http://www.tacticalsoftware.com/kmts en-us http://www.tacticalsoftware.com/kmts ActiveKB NX appeng@tacticalsoftware.com Wed, 08 Sep 2010 22:04:18 EDT 20 http://www.tacticalsoftware.com/kmts/questions/14/ The following serial servers are known to work with Serial/IP: Manufacturer Model(s)------------------ ------------AAxeon STE, LS, PS and SS SeriesAcksys ComethA ... Tactical Support Fri, 09 Jul 2010 01:01:50 GMT http://www.tacticalsoftware.com/kmts/questions/29/ Cisco IOS version 12.0(9) or greater is required. Cisco recommends at least 12.1(8). Upgrade information is available on the Cisco web site.The client machines will need to have the correct modem ... Tactical Support Mon, 24 May 2010 16:05:24 GMT http://www.tacticalsoftware.com/kmts/questions/6/ A Trace Log is a log file that shows all the events and data that passes through our virtual COM ports.If you unable to make a successful connection, our Support staff will ask for a Trace Log tha ... Tactical Support Tue, 25 Aug 2009 19:37:34 GMT http://www.tacticalsoftware.com/kmts/questions/59/ Cisco routers with digital modems (Mica, NextPort) are not able to support dial-in back through DialOut/EZ. The Cisco digital modems are not able to answer an incoming call while there is an ac ... Tactical Support Mon, 31 Aug 2009 17:19:13 GMT http://www.tacticalsoftware.com/kmts/questions/87/ A symptom of this the underlying problem will be the following message from the Cisco server in the DialOut/EZ trace log: "This command has no effect on this line; use modem AT commands instead" ... Tactical Support Tue, 01 Sep 2009 22:12:13 GMT http://www.tacticalsoftware.com/kmts/questions/15/ Most hardware Ethernet-to-serial servers can only send data between the application and serial device. In order to send and receive serial control signals (such as DTR and DCD), a serial server ... Tactical Support Fri, 09 Jul 2010 01:00:15 GMT http://www.tacticalsoftware.com/kmts/questions/26/ Please refer to the Tactical Software Technical Note COM Port Control. Tactical Support Fri, 04 Dec 2009 00:18:43 GMT http://www.tacticalsoftware.com/kmts/questions/58/ In the MRV LX Console, click on Async under the Ports section on the left-side of the interface. A tabbed list of all the ports will appear on the right-hand side. Choose the port that you wis ... Tactical Support Mon, 31 Aug 2009 17:16:07 GMT http://www.tacticalsoftware.com/kmts/questions/84/ This is an IOS bug in the router that has been fixed. The Cisco case number for this issue is CSCec17234. Tactical Support Tue, 01 Sep 2009 22:08:47 GMT http://www.tacticalsoftware.com/kmts/questions/86/ The underlying problem is that the "Password OK" from the Cisco server is being processed by Windows TAPI software as an "OK" from a modem, which it is not. This problem can be solved by using ... Tactical Support Tue, 01 Sep 2009 22:10:33 GMT