<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
	<channel>
	<title>Tactical Software Knowledge Base - Installation &amp; Platforms</title>
	<link>http://www.tacticalsoftware.com/kmts</link>
	<description />
	<language>en-us</language>
	<copyright>http://www.tacticalsoftware.com/kmts</copyright>
	<generator>ActiveKB NX</generator>
	<webMaster>appeng@tacticalsoftware.com</webMaster>
	<lastBuildDate>Wed, 19 Jun 2013 23:26:46 EDT</lastBuildDate>
	<ttl>20</ttl>
	<item>
		<title>How do I move the seat edition of your software to another PC?</title>
		<link>http://www.tacticalsoftware.com/kmts/questions/89/</link>
		<description>1.  Uninstall the software from the old computer.  This is done through the Windows Control Panel | Add or Remove programs applet.
2.  Install the software on the new computer.  You can download  ...</description>
		<author>Tactical Support</author>
		<pubDate>Tue, 12 Jul 2011 16:40:01 GMT</pubDate>
	</item>
	<item>
		<title>Are your products IPv6 compliant?</title>
		<link>http://www.tacticalsoftware.com/kmts/questions/88/</link>
		<description>All versions of Microsoft Windows which support IPv6 are &quot;dual stack&quot;, meaning they can operate in both IPv6 and IPv4 networks. 
Tactical Software has successfully tested its product line in a va ...</description>
		<author>Tactical Support</author>
		<pubDate>Thu, 21 Oct 2010 17:04:56 GMT</pubDate>
	</item>
	<item>
		<title>Are Tactical&#039;s products supported on VMware? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/80/</link>
		<description>Yes, we support VMware as a platform.  
The Tactical Software redirector can either be installed on the
virtual machine, or on the guest machine using the VMware&#039;s COM port
redirecting to allow ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:44:23 GMT</pubDate>
	</item>
	<item>
		<title>Can I install Tactical Software products without any user intervention? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/79/</link>
		<description>Tactical Software products version 4.2 and later use the Microsoft
Installer and support unattended installation.  See the Tactical
Software Technical Notes for information on this feature. 
					</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:43:12 GMT</pubDate>
	</item>
	<item>
		<title>Can I use the COM/IP Redirector with a serial device server?</title>
		<link>http://www.tacticalsoftware.com/kmts/questions/75/</link>
		<description>Yes.  The COM/IP Redirector can be used to convert modem-based
applications to use serial device servers.  This eliminates the need
for modems at either end, while preserving modem behavior expe ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:39:17 GMT</pubDate>
	</item>
	<item>
		<title>Can I use the DialOut/EZ redirector and a modem server for fax applications? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/74/</link>
		<description>Yes, if the modems on the server are fax modems that support Class 2
or Class 2.0 fax and you remember to set your PC faxing software
accordingly. 
Class 1 fax modems are too sensitive to data  ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:38:09 GMT</pubDate>
	</item>
	<item>
		<title>Can I use the DialOut/EZ redirector for a dial-in application? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/73/</link>
		<description>Our COM ports can be used to receive calls for most applications, but
keep in mind that one modem on the server ends up &amp;#8220;wired&amp;#8221; for use by
the listening application that is ready to  ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:37:26 GMT</pubDate>
	</item>
	<item>
		<title>Can Terminal Services/Citrix users make outbound PPP connections (such as Dial Up Networking) with the DialOut/EZ Redirector? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/72/</link>
		<description>Due to architectural issues with the Windows, you can only make one
outbound PPP connection from any Windows machine.  This limitation is
unrelated to redirector software specifically.  For exam ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:36:06 GMT</pubDate>
	</item>
	<item>
		<title>Do I need to have the same COM port numbers defined in the client redirector and the TacServe software? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/69/</link>
		<description>No, they are independent.
					</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:33:36 GMT</pubDate>
	</item>
	<item>
		<title>Do Tactical Software products require a user login to function?</title>
		<link>http://www.tacticalsoftware.com/kmts/questions/68/</link>
		<description>No.  All Tactical Software redirectors are kernel-level device drivers.
 The TacServe COM Port Server and Tactical Software License Manager run
as Windows Services.  Consequently, no user needs  ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:32:51 GMT</pubDate>
	</item>
	<item>
		<title>Do Tactical Software redirectors work with DOS applications running under Windows? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/67/</link>
		<description>In most cases, yes. Please refer to the Tactical Software Technical Note that describes the different methods that DOS uses to access COM ports and how Tactical Software redirectors work with them ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:32:08 GMT</pubDate>
	</item>
	<item>
		<title>Do you have a Quick Start Guide for setting up DialOut/EZ?</title>
		<link>http://www.tacticalsoftware.com/kmts/questions/66/</link>
		<description>The following steps will allow you to quickly get DialOut/EZ running.  Consult the DialOut/EZ User Guide if you get stuck on any of the steps below for more detailed installation and configuration ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:31:26 GMT</pubDate>
	</item>
	<item>
		<title>Do you have a Quick Start Guide for setting up Serial/IP? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/65/</link>
		<description>The following steps will allow you to quickly get Serial/IP running.  Consult the Serial/IP User Guide if you get stuck on any of the steps below for more detailed installation and configuration i ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:30:27 GMT</pubDate>
	</item>
	<item>
		<title>Do your products work with Windows XP Service Pack 2, Vista, 2008 and 7? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/64/</link>
		<description>Yes, we have done significant testing and they will work fine with our most recent version.
Please note, you may need to alter the Windows Firewall settings to allow inbound communications.</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:25:34 GMT</pubDate>
	</item>
	<item>
		<title>How do I answer calls through your software when using a Cisco router with digital modems? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/59/</link>
		<description>Cisco routers with digital modems (Mica, NextPort) are not able to
support dial-in back through DialOut/EZ.  The Cisco digital modems are
not able to answer an incoming call while there is an ac ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:19:13 GMT</pubDate>
	</item>
	<item>
		<title>How do I configure a Patton 29xx RAS server to work with your DialOut/EZ software? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/57/</link>
		<description>Page 111 of the Patton Administrator&#039;s Reference Guide shows the
settings for allowing outbound calls.  Make the following changes in
the Dial Out window on your Patton server:Set the TCP Port t ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:15:13 GMT</pubDate>
	</item>
	<item>
		<title>How do I enable the COM Port Control protocol on Digi TS series devices? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/56/</link>
		<description>In the port setup of the Digi TS select &quot;Printer&quot; as the port type.The
Port Number entered in Serial/IP will then be (2000 + the TS port
number), so Port 1 on the TS can be accessed on TCP port  ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:14:21 GMT</pubDate>
	</item>
	<item>
		<title>How do I upgrade my version 3.x Site Edition to version 4.x? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/53/</link>
		<description>Version 3.x DialOut/EZ clients are able to receive licenses from a
version 4.x License Manager.  This makes the task of upgrading your
Site Edition from version 3.x to 4.x simple and non-disrupt ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:12:01 GMT</pubDate>
	</item>
	<item>
		<title>How should I configure the Windows XP SP2 Firewall when using Tactical Software products? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/52/</link>
		<description>The Windows Firewall that is included with XP Service Pack 2 will
block all incoming connections by default.  Because our redirectors are
kernel-level drivers rather than applications, you can n ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 17:11:03 GMT</pubDate>
	</item>
	<item>
		<title>I&#039;m trying to install modem drivers on your virtual COM ports and Windows XP/2003/Vista is saying that these drivers are not signed. Is this a problem?</title>
		<link>http://www.tacticalsoftware.com/kmts/questions/44/</link>
		<description>No, the modem drivers should work fine.  
In many cases the modem drivers can not be signed as the XP/2003/Vista certification process involves testing the drivers with dial-in to the modem, whic ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 16:57:18 GMT</pubDate>
	</item>
	<item>
		<title>I&#039;m using DialOut/IP and am planning on upgrading.  What do I need to know? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/42/</link>
		<description>As of version 4.5, our DialOut/IP and DialOut/EZ products are merging into a single DialOut/EZ product.If
you are using any version 4.x DialOut/IP Seat Edition product, you can
upgrade to versio ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 16:54:15 GMT</pubDate>
	</item>
	<item>
		<title>If the License Manager is placed behind a firewall, what are the issues I need to be aware of? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/40/</link>
		<description>There are two issues related to firewalls:
The License Manager accepts connections on TCP port 2392. If a
firewall is between the license server and the client, the firewall
will need to allow  ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 16:50:36 GMT</pubDate>
	</item>
	<item>
		<title>Is it possible that Windows will show device conflicts for virtual COM ports created by Tactical Software redirectors? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/39/</link>
		<description>The virtual COM ports created by Tactical Software redirectors do
not use IRQ&amp;#8217;s and are generally not likely to conflict with other
devices. There are two cases that might arise, however. ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 16:49:31 GMT</pubDate>
	</item>
	<item>
		<title>Is there a way to allow INT14 and FOSSIL based DOS programs to use the virtual COM ports created by Tactical Software redirectors?</title>
		<link>http://www.tacticalsoftware.com/kmts/questions/37/</link>
		<description>Send an email to Tactical Software Support support@tacticalsoftware.com and ask for the DOS/INT14 serial port bridge application.  
This is a Tactical Software product that is available at no cha ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 16:47:48 GMT</pubDate>
	</item>
	<item>
		<title>Is there a way to prevent the product from running automatically when Windows is booted? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/36/</link>
		<description>This can be done only by uninstalling the software. The products use kernel-level device drivers that will run if installed. </description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 16:46:56 GMT</pubDate>
	</item>
	<item>
		<title>My License Key is not being accepted. What should I do? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/34/</link>
		<description>If your License Key is not accepted by a Tactical product, please check the following potential problems:
    * Verify the License Key is for the correct product and version
being installed. Lic ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 16:44:19 GMT</pubDate>
	</item>
	<item>
		<title>TacServe will only let me use one modem at a time, even though two (or more) are installed. How do I fix this? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/31/</link>
		<description>The first thing to do is to eliminate TacServe from the equation and
ensure that both modems on the TacServe PC can be opened at the same
time. On the TacServe PC, directly open one of these mod ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 16:39:03 GMT</pubDate>
	</item>
	<item>
		<title>What can cause problems during setup and configuration of Tactical Software products?</title>
		<link>http://www.tacticalsoftware.com/kmts/questions/28/</link>
		<description>Make sure that you are logged onto the machine with administrator
rights during installation.  Modification of the COM port settings may
require administrator rights, if administrator rights are ...</description>
		<author>Tactical Support</author>
		<pubDate>Mon, 31 Aug 2009 16:34:37 GMT</pubDate>
	</item>
	<item>
		<title>When I try to install/use your product I get an error stating the License Key is invalid or has expired. Can you explain the licensing of your Seat Edition products?</title>
		<link>http://www.tacticalsoftware.com/kmts/questions/22/</link>
		<description>Tactical Software products can be used with a free trial license
by leaving the license key blank during the installation. You can
install a given product once in evaluation mode on a computer. ...</description>
		<author>Tactical Support</author>
		<pubDate>Tue, 25 Aug 2009 20:36:18 GMT</pubDate>
	</item>
	<item>
		<title>Where do I find the license key in your products? </title>
		<link>http://www.tacticalsoftware.com/kmts/questions/16/</link>
		<description>In the COM/IP, DialOut/EZ and Serial/IP Seat Edition clients, you
will find the license key by clicking the Licensing button on the
product&#039;s Control Panel.
The DialOut/EZ and Serial/IP TacServ ...</description>
		<author>Tactical Support</author>
		<pubDate>Tue, 25 Aug 2009 20:25:50 GMT</pubDate>
	</item>
	<item>
		<title>Does Tactical Software have a formal statement on date compliance and recent DST changes?</title>
		<link>http://www.tacticalsoftware.com/kmts/questions/11/</link>
		<description>The following statement applies to version 4 and later of the Tactical
Software products COM/IP Redirector, Serial/IP Redirector, DialOut/EZ
Redirector, License Manager and TacServe COM Port Ser ...</description>
		<author>Tactical Support</author>
		<pubDate>Tue, 25 Aug 2009 20:14:50 GMT</pubDate>
	</item>
	</channel>
</rss>
