Preparing to Install
One or more modems or serial devices accessible via Windows COM ports.
Local Computer Requirements
The following platforms are supported: Windows 2012, 10, 8, 7, 2008, Vista, 2003, XP and 2000, including all R2, 32-bit (x86) and 64-bit (x64) versions, on native and virtual platforms, including Virtual Server and VMware.
A TCP/IP network connection between the DialOut/EZ client PC and the TacServe PC is needed.
Server and Firewall Requirements
If there is a firewall between TacServe and DialOut/EZ clients, then it must permit TCP connections on port 7000 from the DialOut/EZ clients to TacServe. If permitted by the firewall, allow TacServe to receive incoming connections on TCP port 7000 and any other ports being used. Its path and filename are:
C:\WINDOWS\SYSTEM32\DRIVERS\TacServe.exe (x86 systems),
C:\WINDOWS\SysWOW64\DRIVERS\TacServe.exe (x64 systems).
Information and Software Required
|•||The TacServe COM Port Server setup program.|
|•||Administrator privileges for the computer on which you will be installing TacServe.|
|•||A TacServe license key, unless installing as a 30-day evaluation.|